These Carpoint vehicle jumper cables are the perfect solution if your car won't start due to a dead battery. They are suitable for use with 6, 12, and 24-volt batteries.

• Red and black color-coded jumper cables: These jumper cables are color-coded (red and black) and are 3 meters long. They have a maximum load of up to 400 amps and metal clamps with insulated handles.
• Connecting jumper cables: Connect the red jumper cable to the positive terminal of the discharged battery. Then connect the other, red clamp to the working battery. Finally, connect the black jumper cable to the negative terminal of the charged battery.
• Ground the cable for safety: Place the other remaining black clamp on the designated starting point of the vehicle with the dead battery, on a metal part of the engine or an unpainted metal part.
• Start the car: Then start the engine of the assisting vehicle, and then start the engine of the vehicle with the dead battery. Important: Disconnecting the jumper cables must be done in the reverse order.
• Handy carrying case: store the Carpoint jumper cables in the included bag after use and keep them in the car so you always have them at hand.

• Color: red and black
• Wire material: copper-clad aluminum
• Dimensions: 250 x 7.7 x 2.1 cm (L x W x H)
• set of 2-piece color-coded jumper cables (red and black)
• Metal clamps with insulated grip on both sides
• Max. load: 400 A
• Copper cable cross-section: 7 mm²
• Cable length (each): 3 m
• Suitable for use with 6, 12 and 24 V batteries
• Connect the red jumper cable to the + terminal of the empty battery
• Connect the other red clamp to the + terminal of the functioning battery
• Finally, connect the black jumper cable to the - terminal of the full battery
• Ground the other remaining black clamp
• Delivery includes :
• 1 x carrying case