Enhance your boat's navigation and sonar capabilities with a reliable networking solution designed for seamless device integration. This 10-meter RayNet to RayNet cable bridges the gap between your CP100 Sonar Sounder Module and multifunction displays, ensuring high-speed data transfer without interruptions even in choppy waters.

Why This Cable Elevates Your Marine Electronics Setup

In the demanding world of recreational boating, every connection counts. Traditional wiring can falter under saltwater exposure and constant vibration, but this black RayNet cable stands out with its rugged, waterproof connectors that lock securely into place. At 32.8 feet, it offers the flexibility to route through bulkheads or across decks without signal loss, making it ideal for mid-sized vessels where displays and sensors aren't side-by-side.

Boaters often overlook cable quality until a glitch during a critical moment—like spotting fish or navigating fog. This cable prevents that by supporting Raymarine's proprietary RayNet protocol, which handles real-time sonar data, chart updates, and instrument overlays with ease. It's not just a wire; it's the backbone of a unified system that keeps you informed and safe.

Key Compatibility and Versatile Applications

• Perfectly pairs CP100 Sonar Sounder Modules with e-Series and c-Series multifunction displays for crystal-clear bottom tracking and fish arches.
• Extends networks in daisy-chain setups, connecting multiple MFDs, radars, or AIS units without hubs.
• Works reliably with Raymarine's ecosystem, from classic e and c lines to modern expansions, ensuring future-proofing your helm.

Whether you're upgrading an older setup or building a new one, this cable simplifies expansion. Anglers use it to link sonar modules for deeper scans, while cruisers appreciate the stable video feeds from thermal cameras routed over the same network.

Engineered for Extreme Marine Conditions

Raymarine's reputation for toughness shines through here. The cable's jacket resists UV rays, abrasion, and oil, while the RayNet plugs feature a twist-lock mechanism that's fully submersible up to 3 meters. Vibration from engines or rough seas? No problem—it's tested to endure prolonged exposure.

Real-world tip: For best performance, keep runs under 50 meters total in a chain and avoid sharp bends tighter than 4 inches. This minimizes any potential interference, keeping your NMEA 2000 data flowing smoothly alongside RayNet traffic.

Installation Made Simple for DIY Boaters

1. Power down all devices and disconnect existing cables.
2. Align the keyed RayNet ports and twist clockwise until it clicks—it's foolproof and tool-free.
3. Secure with cable ties away from heat sources or moving parts.
4. Boot up and verify network status on your MFD; green lights confirm a solid link.

No soldering or crimping required, saving hours compared to generic Ethernet alternatives that often fail in wet environments.

Quick Specs at a Glance

Frequently Asked Questions